Gear pump with cast-iron body
Model CI-P
Heavy cast-iron gear pump for continuous tipper duty.
View detailsApplication
Front-end telescopic cylinders, centre-lift cylinders, gear pumps, valves and PTOs for rigid tipper trucks and heavy-duty dump bodies working in construction, aggregate and quarry transport.
Model CI-P
Heavy cast-iron gear pump for continuous tipper duty.
View detailsModel 100
100 size gear pump with axial ports, the standard pump for medium tipper bodies.
View detailsModel NE-P
Gear pump configured for electric-drive trucks where the pump is driven from the electric po…
View detailsModel MB-1
Monoblock directional valve with lever control for lift, hold and lower functions.
View detailsModel MB-A
Monoblock valve operated by air cylinders instead of a mechanical lever, for remote control…
View detailsModel MS-2
Two-section sectional valve for bodies with two hydraulic functions.
View detailsModel MS-3
Three-section valve for lift, auxiliary and secondary functions on the same body.
View detailsModel MS-2A
Air-controlled two-section valve for remote operation of two hydraulic functions.
View detailsModel PHC
Hand control valve with proportional spool travel, available with three-hole or four-hole po…
View detailsModel LV-1
Limit valve that stops or diverts flow when the cylinder reaches the end of its travel.
View detailsModel SV-1
Electrically operated solenoid valve for remote or automated hydraulic control.
View detailsModel VM
Stacked valve manifold used to distribute flow between several hydraulic functions.
View detailsModel PTO-FAW
Power take-off unit matched to the gearbox of FAW trucks, used to drive the tipping pump.
View detailsModel B25
Power take-off in the B25 configuration for United Truck gearboxes.
View detailsModel 4E240.H8
Power take-off unit in the 4E240.H8 configuration, supplied with the mounting gasket and fas…
View detailsModel PTO-FG
Power take-off matched to Fast Gear (Shanxi Fast) transmissions, supplied as an installation…
View detailsModel 27N11.B25
Power take-off unit in the 27N11.B25 configuration with the matching mounting parts.
View detailsModel 7012DH.H8
Power take-off unit in the 7012DH.H8 configuration for heavy truck gearboxes.
View detailsModel 60D2531.H8
Power take-off unit in the 60D2531.H8 configuration, supplied with gasket and fasteners.
View detailsModel PTO-ZF
Power take-off matched to ZF transmission families.
View detailsModel PTO-DFR
Power take-off for Dongfeng gearboxes fitted with an integrated retarder.
View detailsModel 6E240
Power take-off dedicated to the Fast Gear 6E240 transmission family.
View detailsModel PTO-FGAT
Power take-off for Fast Gear automated manual transmissions.
View detailsModel PTO-EV
Power take-off developed for battery-electric truck drivetrains.
View details